杜笙纯水混床阳离子树脂T-42UPS
用于制备超纯水用混床阳离子交换树脂
优点：均粒核子级树脂，出水>15M
Tulsion®  T-42 UPS                                                                                                                  ISO-9001/ISO-14001/OHSAS-18000
均粒强酸形阳树脂 , 氢 H+ / 钠 Na+
均粒强酸性阳离子适用于超 纯水的可再生混床系统
Tulsion®  T-42 UPS 强酸型阳性离子交换樹脂 ,是一款有较高的交换容量 ,及同时拥有**的物理及化学稳定品质。可应用于汽电共生发电厂冷凝水处理及混床系統, 去除水中的阳性离子 。
Tulsion®  T-42 UPS 其均勻的颗粒直径, 能取代传统的离子交换樹脂, 並可以减少压力损, 可以和Tulsion A-23 UPS 一起搭配使用於2B3T及超纯水可再生的混床。

典型特性（TYPICAL CHARACTERISTICS）： Tulsion T-42 UPS

主体结构/Matrix structure              Cross linked polystyrene
型式(Type)                                                    Strong acid Cation exchange resin
物理型式/Physical form                                湿润球状/Moist spherical beads
官能团/Functional group                              磺酸基/Sulphonic
粒径Particle size (Mesh)                               Particle less than 0.3mm max. 1%
均匀系数(Uniformity coefficient)                Max. 1.25
平均粒径(Harmonic Mean size)                   580 + 50 um
全交换容量(Total Exchange Capacity)        1.80 meq/ ml
离子型式(Ionic form)                                   Hydrogen (H+)
膨胀係数(Swelling (approximately))          7% from Na+ to H+ form.
湿度/Moisture content                      53%
密度(Backwash settled density)                        800-840 g/l in H+ form
830-870 g/l in Na+ form
允许温度(Maximum temp. stability)            120°C in H+ form
140°C in Na+form
PH范围/PH range                                               0 - 14
溶解率(Solubility)                                             Insoluble in all common solvents

操作条件（OPERATION CONDITIONS）：    Tulsion T-42 UPS


*大操作溫度(Operating temperature , max 0 C)                120
操作pH 范围(Operating pH range )                                       0 – 14
*小树脂床高度(Bed depth , mini mm)                               800
*大(Service flow rate ,Maxi )                                              120 m3/hr/ m3
逆洗水量(Backwash flow rate)                                             9 to 25 m3/hr/ m3
逆洗浮動空間(Back wash expansion)                                  40 to 75%
再生药剂(Regenerant )                                                         HCl, H2SO4 for H+ form,
再生药剂用量(Regeneration levels. )                                   30 to 120 gms HCl/ lit.
40 to 250 gms H2SO4/ lit.
再生药剂浓度(Regeneration concentration)                          3 - 5% HCl, 1.5 to 3% H2SO4
*少通再生药剂时间(Regeneration Contact time, mini)      20 min.
再生流量(Regeneration flow rate )                                        5 to 16 m3/hr/ m3
Regeneration slow rinse                                                          2 BV mini.
快洗用水(Fast Rinse )                                                            Service flow rate.
快洗水量(Fast Rinse Volume)                                                 2 to 3 BV

测试（TESTING）：                    Tulsion T-42 UPS
离子交换树脂的抽样和测试是按标准的测试程序，即ASTMD - 2187和IS - 7330，1998.
包装（PACKING）：                    Tulsion T-42 UPS

Super Sack
1000 lit
Super Sack
35 cft
MS drums
180 lit.
MS drums
7 cft
HDPE lines Bags
25 lit.
HDPE lines Bags
1 cft
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
For further information, please contact:：